Bronze Swing Check Valve

Search for Bronze Swing Check Valve videos, reviews, deals | Watch Bronze Swing Check Valve online & compare prices

NIBCO T-413-Y-LF Silicon Bronze Lead-Free Check Valve, Horizontal Swing, Class 125, PTFE Seat, 3/4" Female NPT Thread (FIPT)

 (NIBCO T-413-Y-LF Silicon Bronze Lead-Free Check Valve, Horizontal Swing, Class 125, PTFE Seat, 3/4
Bronze check valve for use in commercial and industrial applications. Typical services include; hot and cold water, HVAC, steam, compressed air, gas and other general utility services.

Milwaukee Valve UP1509 Series Bronze Swing Check Valve, Potable Water Service, 1/2" Solder End

 (Milwaukee Valve UP1509 Series Bronze Swing Check Valve, Potable Water Service, 1/2
The Milwaukee Valve UP1509 series bronze swing check valve with solder connections on both ends is a class 125 valve used suitable for potable water service and is used for restricting fluid flow to one direction. It has a hinged disc that swings onto the seat of the valve to block reverse flow. The valve body is made of American Society of Testing and Materials (ASTM) B-584 bronze for strength and corrosion resistance. This valve has maximum pressure ratings of 300 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and a cracking pressure of 0.5 psi. It has solder connections on both ends for semi-permanent yet reversible connections to tubing. This valve is for use in water lines, processing plants, and agricultural applications and meets standard Manufacturers Standardization Society (MSS) SP-80 for quality assurance. The UP1509 was designed in accordance with the requirements of California Assembly Bill 1953, Vermont Senate Bill S.152, and U.S. Senate Bill S3874 which limit the amount of lead in plumbing fixtures that come in contact with water intended for human consumption. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Check valves have two ports and ...

NIBCO T-413-Y Cast Bronze Check Valve, Silent Check, Class 125, PTFE Seat, 1-1/4" Female NPT Thread (FIPT)

 (NIBCO T-413-Y Cast Bronze Check Valve, Silent Check, Class 125, PTFE Seat, 1-1/4
Bronze check valve for use in commercial and industrial applications. Typical services include; hot and cold water, HVAC, steam, compressed air, gas and other general utility services.

Milwaukee Valve 509 Series Bronze Swing Check Valve, Class 125, 3/8" NPT Female

 (Milwaukee Valve 509 Series Bronze Swing Check Valve, Class 125, 3/8
This Milwaukee Valve 509 series bronze swing check is a class 125 valve used for restricting fluid flow to one direction and has female National Pipe Taper (NPT) threaded connections on both ends. It has a hinged disc that swings onto the seat of the valve to block reverse flow. The valve body is made of American Society for Testing and Materials (ASTM) B-62 bronze for strength and corrosion resistance. This valve has maximum pressure ratings of 200 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP), and a cracking pressure of 0.5 psi. It has female NPT threaded connections on both ends for creating tighter seals than straight threads. This class 125 check valve is for use in water lines, processing plants, and agricultural applications and meets standard Manufacturers Standardization Society (MSS) SP-80 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, and they remain open when flow moves in the correct d...

Apollo 162T Series Bronze Swing Check Valve, Class 125, Viton Seat, 1" NPT Female

 (Apollo 162T Series Bronze Swing Check Valve, Class 125, Viton Seat, 1
This class 125 Apollo 162T series swing check valve is a y-pattern check valve, and can be installed in both horizontal and vertical line with upward flow. The valve body is made of bronze for higher resistance to corrosion than brass, and are resistant to dezincification. Viton(R) seat provides extreme temperature and chemical resistance. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum cold working pressure (CWP) is 200 pounds per square inch (psi) at 100 degrees Fahrenheit, and the maximum steam pressure (SWP) is 67 psi at 300 degrees Fahrenheit. This valve meets standards Manufacturers Standardization Society (MSS) SP 80, and American Society of Mechanical Engineers (ASME) B1.20.1 for quality assurance.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to bl...

Swing Check Valve, Bronze, 1/4 In., NPT

 (Swing Check Valve, Bronze, 1/4 In.,)
' Swing Check Valve, Material of Construction Bronze, Size 1/4 In., Connection Type NPT, Length 2-1/16 In., Cap to Inlet Center 1-5/16 In., Max. Steam Pressure 125 psi, Max. Water Pressure 200 psi, Cracking Pressure 0.75 to 1 psi, Max. Temp. 406 Degrees F, Mounting Position Vertical or Horizontal, Seat Material Bronze, Hex Size 29/32 In., Standards MSS-SP-80, ASTM B62 '

Apollo 161T-LF Series Bronze Swing Check Valve, Potable Water Service, Class 125, Bronze Seat, 1-1/4" NPT Female

 (Apollo 161T-LF Series Bronze Swing Check Valve, Potable Water Service, Class 125, Bronze Seat, 1-1/4
This class 125 Apollo 161T-LF series swing check valve is a lead-free y-pattern check valve, and can be installed in both horizontal and vertical line with upward flow. The valve body and seat are made of bronze for higher resistance to corrosion than brass, and are resistant to dezincification. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum cold working pressure (CWP) is 200 pounds per square inch (psi) at 100 degrees Fahrenheit. The working temperature range is -20 to 406 degrees Fahrenheit. This valve meets standards Manufacturers Standardization Society (MSS) SP139, National Sanitation Foundation (NSF)/American National Standards Institute (ANSI) 61-8 Annex F and G, and American Society of Mechanical Engineers (ASME) B1.20.1 for quality assurance.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing ...

Apollo 161T Series Bronze Swing Check Valve, Class 125, Bronze Seat, 3/8" NPT Female

 (Apollo 161T Series Bronze Swing Check Valve, Class 125, Bronze Seat, 3/8
This class 125 Apollo 161T series swing check valve is a y-pattern check valve, and can be installed in both horizontal and vertical line with upward flow. The valve body and seat are made of bronze for higher resistance to corrosion than brass, and are resistant to dezincification. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum cold working pressure (CWP) is 200 pounds per square inch (psi) at 100 degrees Fahrenheit, and the maximum steam pressure (SWP) is 125 psi at 353 degrees Fahrenheit. The working temperature range is -20 to 406 degrees Fahrenheit. This valve meets standards Manufacturers Standardization Society (MSS) SP 80, and American Society of Mechanical Engineers (ASME) B1.20.1 for quality assurance.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hing...

Milwaukee Valve 509Y Series Bronze Swing Check Valve, Class 125, 3/4" NPT Female

 (Milwaukee Valve 509Y Series Bronze Swing Check Valve, Class 125, 3/4
The Milwaukee Valve 509Y series bronze swing check valve with female National Pipe Taper (NPT) threaded connections on both ends is a class 125 valve used for restricting fluid flow to one direction. It has a hinged disc that swings onto the seat of the valve to block reverse flow. The valve body is made of American Society for Testing and Materials (ASTM) B-62 cast bronze for strength and corrosion resistance. This valve has maximum pressure ratings of 200 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP), and a cracking pressure of 0.5 psi. It has female NPT threaded connections on both ends for creating tighter seals than straight threads. This class 125 check valve is for use in water lines, processing plants, and agricultural applications and meets standard Manufacturers Standardization Society (MSS) SP-80 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, and they remain open when flow moves in the c...

NDS 1720-20 2" Slip Union Swing Check Valve

Bronze Swing Check Valve (NDS 1720-20 2

Swing Check Valve PVC Clear 1.5'' Slip x Slip

Bronze Swing Check Valve (Swing Check Valve PVC Clear 1.5'' Slip x)

Custom Molded 25830-150-000 Swing Check Valve, 1-1/2in. Slip x 2in. SPG

Bronze Swing Check Valve (Custom Molded 25830-150-000 Swing Check Valve, 1-1/2in. Slip x 2in.)
Shopping Results for "Bronze Swing Check Valve"

Shopexlist.com | All rights Reserved | Sitemap

Shopexlist.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.