Fuel Flow Meter

Search for Fuel Flow Meter videos, reviews, deals | Watch Fuel Flow Meter online & compare prices

1″ Digital Turbine Flow Meter,Gas Oil Fuel Flowmeter,Pump Flow Meter ,Diesel Fuel Flow Meter,High Accuracy,for Measure Diesel, Kerosene, Gasoline, etc.(Red)

 (1″ Digital Turbine Flow Meter,Gas Oil Fuel Flowmeter,Pump Flow Meter ,Diesel Fuel Flow Meter,High Accuracy,for Measure Diesel, Kerosene, Gasoline,)
Description: This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters. Features: Modular design makes it suitable for use with output modules, sensors and remote transmitters. Compact structure, easy to install. Intuitive clear reading, high reliability, measuring accuracy is ±1%. High-definition displays show both instantaneous and cumulative flow. Can be widely used to measure diesel, kerosene, gasoline, etc. Specification: Operating voltage: 2.3-3.3V Battery type: 2 x AAA LRO3 batteries Thread size: 1inch NPT Repetition: ±0.5% Measure accuracy: ±1% Maximum working pressure: 20BAR Flow range: 15-120L / Min Single count: 0.00-9999.9 Total cumulative count: 0-99999 Mistakes count: 0.1000-9.9999 Working temperature: -10°C ~ +60°C(14°F~140°F) Standby time: 1 year Application: Diesel, kerosene, gasoline Color: Red, Blue(Optional) Weight: 371g Package List: 1 x Turbine Flow meter

GPI 4.2117G 113255-1 Digital Fuel Meter

 (GPI 4.2117G 113255-1 Digital Fuel)
Dee Zee by GPI tank accessories. 2 Totals (1 Accumulative, 1 Batch), flow range 3 to 30 GPM; reads in gallons; 1 in. female NPT thread. Look for the Red Label! Pumps, meters, and accessories. You can now order GPI's entire catalog through Dee Zee. Everything to make your transfer tank to a perfect fit for you. Visit www.gpi.net for more information on part numbers.

Fill-Rite TT10AN 1" 2-35 GPM(8-132 LPM) Digital In-line Turbine Meter, Aluminum, Fuel Transfer Meter

 (Fill-Rite TT10AN 1
Electronic in-line turbine meter that may be installed at the end of a hose or plumbed in a fixed pipe installation with the 1 inch NPT Inlet/Outlet. This UL listed meter is great for gasoline, diesel, or kerosene. The meter comes from the factory with 20 Pre-Set calibration factors based on fluid Type or can be easily calibrated in the field. Operates on 2-aa batteries that can be easily changed when needed. A low battery level alert will Notify the user when it is time to change the batteries.

Fill-Rite FR1118A10 3-26 GPM In-line Digital Flow Meter, Aluminum

 (Fill-Rite FR1118A10 3-26 GPM In-line Digital Flow Meter,)
The Fillrite FR1118A10 is an in-line digital flow meter with a flow rate of 28 gallons per minute. The mechanical flow meter is produced in the U.S. with the seal of approval "UL" (Underwriters Laboratories) and EC (European Community). The body shell is made from aluminum, with the measurement chamber polyurethane highly resistant and non deformable. Features 2% margin of error accuracy. Benchmarking can be measured by calibratrion screw. This meter has a 1 inch internal thread input and output, and is a tilting disc type. It has a maximum pressure rating of 145 psi. Can also be used by gravity or coupled pumps. Only use with diesel and kerosene. DO NOT USE with gasoline, water, Diesel Exhaust Fluid (DEF), and chemical fluids.DO NOT USE with gasoline, water, Diesel Exhaust Fluid (DEF), and chemical fluids.

Fill-Rite 807C 3 Wheel Mechanical Meter, 5 to 20 GPM

 (Fill-Rite 807C  3 Wheel Mechanical Meter, 5 to 20)
The 807C Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and heptane. Fill-Rite meters provide precision and durability in a cost-effective design. The 807C is a 3 wheel mechanical meter designed for transfer pumps with a flow rate of 5 to 20 GPM (gallons per minute). This meter has a 3/4 " inlet and outlet.

Mophorn Mechanical Fuel Meter 20-120L/Min Digital Diesel Fuel Flow Meter Black Fuel Meter Diesel For All Fuel Transfer Pumps 10Bar

 (Mophorn Mechanical Fuel Meter 20-120L/Min Digital Diesel Fuel Flow Meter Black Fuel Meter Diesel For All Fuel Transfer Pumps)
Mechanical Fuel Meter 20-120L/min For All Fuel Transfer Pumps 10Bar Color Black Mechanical meters designed to measure the exact quantity of dispensed liguid fuel or lubricant. Reliable, economical and easy to install and calibrate on site. Feature: Designed to measure the exact quantity of dispensed liquid fuel or lubricant Reliable, economical and easy to install 20-120L/min Reduced resistance to flow 0.2% With a large display, easy to read and install proofreading With fast back to zero rotation, allow to flexible horizontal or vertical installation, etc Specification: Flow rates: 20-120L/min Accuracy: +/- 1% Repeatability: 0.2% Max.operating pressure: 10Bar Bursting pressure: 30Bar Package Content: 1 x Mechanical Fuel Meter

Fuel Flowmeter, Turbine Flowmeter, Diesel, Gasoline, Kerosene Fuel Flow Meter with Digital LCD Display, 1-Inch FNPT Inlet/Outlet(Red)

 (Fuel Flowmeter, Turbine Flowmeter, Diesel, Gasoline, Kerosene Fuel Flow Meter with Digital LCD Display, 1-Inch FNPT)
Malfunction and solution: The flow meter is not accurate. 1. The method of field calibration is not correct.  Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely. 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly. 6. Too close to the motor or electronic noise environment. install properly. Flow rate is normal but the meter can not count. Press the button of DISPLAY, the meter starts. 1. Field calibration is not correct. Calibrate again. 2. The impeller is blocked or damaged. Remove the meter and make sure the impeller turns freely. 3. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. Specifications:  Operating voltage: 2.3-3.3V Battery type: 2 x AAA LRO3 batteries Thread size: 1inch NPT Repetition: ±0.5% Measure accuracy: ±1% Maximum working pressure: 20BAR Flow range: 15-120L / Min Single count: 0.00-9999.9 Total cumulative count: 0-99999 Mistakes count: 0.1000-9.9999 Working temperature: -10°C ~ +60°C(14°F~140°F) Standby time: 1 year Appl...

Garmin GFS 10 Fuel Sensor

 (Garmin GFS 10 Fuel Sensor)
Add fuel tracking capabilities to your Garmin chartplotter and optimize your boat's fuel economy. The GFS 10 tracks fuel flow use and sends the data to your chartplotter via the Garmin CANet or NMEA 2000. Unlike other fuel flow sensors, the GFS 10 will include fuel level sensing capability when connected to an existing analog fuel gauge or resistive fuel tank sensor. Maximum fuel flow rate for the GFS 10 is 50 gallons per hour, and the minimum flow rate is two gallons per hour.Compatible with the GPSMAP 400 & 500 series via CANet and the 4000 series, 5000 series and GMI.

1″ Digital Turbine Flow Meter,Gas Oil Fuel Flowmeter,Pump Flow Meter ,Diesel Fuel Flow Meter,High Accuracy,for Measure Diesel, Kerosene, Gasoline, etc.(Blue)

 (1″ Digital Turbine Flow Meter,Gas Oil Fuel Flowmeter,Pump Flow Meter ,Diesel Fuel Flow Meter,High Accuracy,for Measure Diesel, Kerosene, Gasoline,)
Description: This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters. Features: Modular design makes it suitable for use with output modules, sensors and remote transmitters. Compact structure, easy to install. Intuitive clear reading, high reliability, measuring accuracy is ±1%. High-definition displays show both instantaneous and cumulative flow. Can be widely used to measure diesel, kerosene, gasoline, etc. Specification: Operating voltage: 2.3-3.3V Battery type: 2 x AAA LRO3 batteries Thread size: 1inch NPT Repetition: ±0.5% Measure accuracy: ±1% Maximum working pressure: 20BAR Flow range: 15-120L / Min Single count: 0.00-9999.9 Total cumulative count: 0-99999 Mistakes count: 0.1000-9.9999 Working temperature: -10°C ~ +60°C(14°F~140°F) Standby time: 1 year Application: Diesel, kerosene, gasoline Color: Red, Blue(Optional) Weight: 371g Package List: 1 x Turbine Flow meter

Fuel Gasoline Diesel Petrol Oil Delivery Gun US Nozzle Dispenser & Flow Meter

Fuel Flow Meter (Fuel Gasoline Diesel Petrol Oil Delivery Gun US Nozzle Dispenser & Flow)

Genuine W0133-1660968 Fuel Injection Air Flow Meter Boot for Volvo Models

Fuel Flow Meter (Genuine W0133-1660968 Fuel Injection Air Flow Meter Boot for Volvo)

Turbine Digital Diesel Fuel Flow Meter Oval Gear Flow Gauge BSPT/NPT 1" 200L/MIN

Fuel Flow Meter (Turbine Digital Diesel Fuel Flow Meter Oval Gear Flow Gauge BSPT/NPT 1
Shopping Results for "Fuel Flow Meter"

Shopexlist.com | All rights Reserved | Sitemap

Shopexlist.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.