Hitch Bed Extender

Search for Hitch Bed Extender videos, reviews, deals | Watch Hitch Bed Extender online & compare prices

ECOTRIC Pick Up Truck Bed Hitch Extender Extension Rack Canoe Boat Kayak Lumber w/Flag

 (ECOTRIC Pick Up Truck Bed Hitch Extender Extension Rack Canoe Boat Kayak Lumber)
Brand New Truck Bed Extender for 2" trailer hitches. Use the truck bed extender when transporting longer loads in your pick up truck bed! The truck bed extender is adjustable height and width wise to fit your application needs! Constructed of heavy duty steel tubing! NEW PRODUCT WITH FACTORY PACKAGING FEATURES: Weight capacity of up to 750 lbs. included safety flag to attach to the end of your load. The Hitch Extender fit into 2" square hitch receivers but can be used on 1-1/4" receivers with a hitch adaptor. Length: 53 1/2" from center of 1/2" hitch pin hole to end of extension ,52" from center of 3/4" hitch pin hole to end of extension Adjustable Width: 28.25" - 48.75" Adjustable Height: 4" - 10" Weight: 27 lbs.

MaxxHaul 70231 Hitch Mount Truck Bed Extender (For Ladder, Rack, Canoe, Kayak, Long Pipes and Lumber)

 (MaxxHaul 70231 Hitch Mount Truck Bed Extender (For Ladder, Rack, Canoe, Kayak, Long Pipes and)
Our 70231 Hitch Mount Truck Bed Extender effectively extends your truck bed for carrying longer payloads. Adjustable length and width allows for many different applications including: Ladders, Racks, Canoes, Kayaks, Long Pipes, Lumber and more. Constructed from heavy duty steel with reflective tape on the front and sides for increased visibility and safety. The side arms can be folded down to create supports for a portable work area and the 4 quick release clevis pins allow for quick assembly and disassembly. This product is designed to fit 2-Inch receivers and has a load capacity of 350 pounds. Length: 53-1/2-Inches from center of the 1/2-Inch hitch pin hole to the end of extension. Adjustable width from 28-1/4-Inches to 48-3/4-Inches, adjustable height from 4-Inches to 10-Inches. Hitch pin sold separately.

Lund 601021 Hitch Mounted Truck Bed Extender

 (Lund 601021 Hitch Mounted Truck Bed)
Lund's Hitch Rack Truck Bed Extender is designed to allow you to carry extended length cargo. It provides an additional 7 inch ground clearance and is equipped with side wings that are adjustable from 27 to 49 inches. This bed extender has a distributed load capacity of 750 pounds and has a side support which folds down if required. It is DOT approved and fits a standard 2 inch receiver hitch.

Erickson 07605 Pick-Up bed Extender (Big Bed Junior, 350 lb. rated)

 (Erickson 07605 Pick-Up bed Extender (Big Bed Junior, 350 lb.)
Erickson 07605 Big Bed Junior (Tailgate Extender) is smaller version of Erickson's original Big Bed Extender. BIG BED = BIG BENEFITS!!! At only 29 lbs., the Erickson Big Bed Junior is lightweight, yet still heavy duty! Easily fit the extender into your vehicle's 2" receiver and expand its loading length another 4 FEET. Extender is rated for 350lbs of distributed weight; this allows you to haul longer loads safely, no trailer is required. When installed, the Extender is 52" x 50" x 25.5". The Extender is black powder coated, making it rust resistant and features two welded loops on the cross bar (one on each side) to securely tie-down your load. Perfect solution for short bed truck’s, suv’s, vans or any other vehicle capable of hauling loads such as lumber, canoes, hunting gear, extension ladders, sheets of plywood & drywall. Or use it as work bench or table for tail gate parties! As a leader of Tie-Down and Towing Products in North America, Erickson strives to provide the safest products available with the consumer in mind. Tie it. Tow it. Load it. Count on Erickson.

Tricam SLE-1/SKLE-350 2 in 1 E-Z Hitch Mounted Load Extender, 350-Pound Capacity, Black Finish

 (Tricam SLE-1/SKLE-350 2 in 1 E-Z Hitch Mounted Load Extender, 350-Pound Capacity, Black)
"The Tricam SLE-1/SKLE-350 2 in 1 E-Z Hitch Mounted Load Extender allows you to transport lumber, drywall, ladders, kayaks and much more by quickly and easily extending your truck bed or roof rack. Constructed of heavy duty 2-inch tubular powder-coated steel that is rust resistant. The versatile design of the extender can be used horizontally or vertically on any 2-inch hitch receiver and features (5) adjustable heights. When not in use, the load extender breaks down into (2) pieces for convenient and compact storage. The SLE-1/SKLE-350 has a 350-pound capacity and measures 50.75-Inch (L) by 14.75-Inches (H) by 2.375-Inch (W) when set up as a T-support and measures 52.75-Inch (L) by 13.125 (H) by 2-Inch (W) when set up as a L-extension and weighs 32.5-pounds. The Tricam SLE-1/SKLE-350 2 in 1 E-Z Hitch Mounted Load Extender comes with a 1-year limited warranty. Tricam is a leading consumer products company who continues to lead the industry with innovative, patented designs throughout their entire product line. Tricam's products include household step stools, lawn and garden carts, replacement tires and tire tubes. As shown in installation manual, long extended bar fits inside cross bar piece.

Darby Industries 944 Extend-A-Truck

 (Darby Industries 944)
Extend-A-Truck Extender is designed for secure and safe hauling of long loads above or behind the vehicle. It features a 4" wide support and adjustable height for roof top hauling as well as bed extension. This extend-a-truck can be stored flat behind the seat when not in use and comes with a red flag.

ECOTRIC Foldable Pick Up Truck Bed Hitch Extender Extension Rack Canoe Boat Kayak Lumber w/Flag

 (ECOTRIC Foldable Pick Up Truck Bed Hitch Extender Extension Rack Canoe Boat Kayak Lumber)
Perfect solution for short bed vehicles capable of hauling loads such as lumber, canoes, hunting gear, extension ladders, sheets of plywood & drywall. Or use it as work bench or table for tail gate parties! Features: Condition: 100% Brand New Model: ET-015 Color: Black Material: Steel Surface Finish: Powder coated Rated for 400lbs of distributed weight Extender is 52" x 50" x 25.5" when installed and 52" x 2.5" x 7" when collapsed. Expand your vehicle's loading length another 4 FEET Fits 2" square hitch receiver Shipping(Shipping policy only applies to orders Fulfilled by the seller) All items will be shipped out in 1 business day,no expedited service available. We ship our items to USA only(Does NOT include Hawaii,Alaska or Puerto Rico, PO Boxes/APO's ). Contact us Provide technical support at any time.Please feel free to tell us what we can do for you,we will reply in one business day. About Return Within one month after receiving the goods, if you find any defect in the product, please contact us for free replacement. Return within one month for non-buyer reasons, free return label and full refund guarantee.(Please contact us directly through Amazon message system to get the return label)

TAC 2" Truck Bed Trailer Hitch Mount Extender 500 LBS Capacity Utility Adjustable Universal Pick Up Extension Rack for Kayak Canoe Ladder Lumber Pipes Cargo Carrier Accessories with Pins

 (TAC 2
Custom Fit: 2" Hitch Receiver Load Capacity: 500 lbs Adjustable Width: 15.3"-22.4" by horizontal place 55"-62" by vertical place Finish: Fine texture black Package Included: (1) 1 set Extender Rack (2) 2 sets Locking Pins (3) Installation Instruction About us TAC is one of North America's top online suppliers of specialized, high-quality aftermarket car and truck accessories. With over 20 years of auto accessory manufacturing experience, TAC delivers unparalleled quality, value, service and satisfaction. Our highly-trained, professional staff offer in-depth knowledge and personalized assistance for customers worldwide. Providing our customers with a simple, hassle-free experience with best-in-class customer service is more than a goal. It is our foundation. We know your trust and satisfaction can only be earned one transaction at a time.

Tow Tuff TTF-72TBE Steel Truck Bed Extender, 36-Inch

 (Tow Tuff TTF-72TBE Steel Truck Bed Extender,)
Tow Tuff’s TTF-72TBE Steel Truck Bed Extender is the easy way to extend your truck bed by up to 3 feet. Transport ladders, small boats, drywall, canoes, lumber, and so much more with the convenient bed extender. With the ability to hold up to 350 lbs., this bed extender can handle a wide variety of loads. The extender easily attaches to 2” Class III and IV receivers. Adjust the height of the bed extender in 1 ¾” increments from 15” to 22”. The width is also adjustable at 48”, 60”, and 72”. Tow Tuff’s Truck Bed Extender is constructed of heavy-duty steel with a powder-coat finish, giving you a durable and long-lasting product that will resist corrosion. The bed extender is easy to remove and store in compact spaces, giving you less hassle. Safely and easily secure long loads!

MaxxHaul 70231 Hitch Mount Truck Bed Extender (For Ladder, Rack, Canoe, Kayak, Long Pipes and Lumber)

Hitch Bed Extender (MaxxHaul 70231 Hitch Mount Truck Bed Extender (For Ladder, Rack, Canoe, Kayak, Long Pipes and)

Costway Pick Up Truck Bed Hitch Extender Adjustable Steel Extension Rack Loads Flag

Hitch Bed Extender (Costway Pick Up Truck Bed Hitch Extender Adjustable Steel Extension Rack Loads)

Spec-D Tuning Fit Pickup Trunk Suv 2" Hitch Mount Track Bed Extender Black Powder Coated

Hitch Bed Extender (Spec-D Tuning Fit Pickup Trunk Suv 2
Shopping Results for "Hitch Bed Extender"

Shopexlist.com | All rights Reserved | Sitemap

Shopexlist.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.