Want to make your room more colorful? Want to redecorate your home in a simple way? Different styles, 3D Vinyl Simulation window sticker will be your best bet. Extensive: Great for any smooth wall surface, doors, dorms, bedrooms, offices, kids play areas, reception areas, waiting rooms, halls. Not recommended for high moisture areas, above or near fireplaces and cribs. Warm Tips: 1.After receiving the sticker, place the sticker on a hard surface (the table works very well), and put a few books on it to flatten it. Please loosen the sticker and keep it flat for 1 day until the sticker is restored. Flat and then paste to avoid curling. 2.If the wall is wet, aged or just refreshed, the Sticker will automatically fall off,You can use a hair dryer to dry the walls with hot air or wait for the paint to evaporate for a while, but the effects may vary, so please be careful to post. Matters Needing Attention: 1.Make sure that the pasting surface must be smooth flat clean and dry. 2.When pasting large area stickers, start from a corner, paste onto the surface, and slowly peel off (suggest two people pasting together). 3.Due to manual measurement, please kindly allow 1-2 inch discrepancy.